Innovation creates a competitive edge
Performance Tuning for the Claas Arion 420 4.5 FPT Tier 4
PowerControl PDI10 was specifically developed for agricultural applications with the aim of reaching the full potential of the engine and reducing fuel consumption. With this tuning system, the PDI10, both advantages are combined: maximum power output and low operating costs.
Turning the Claas Arion 420 into a real power tractor
The mobile dynamometer from DTE makes it all happen! Directly connected to the PTO, the DTE mechatronics technicians measure the serial performance of Claas Arion 420.
And here comes the PDI10... After being installed, the programming is carried out in coordination with the customer. Depending on the tractor and engine, a professional chiptuning with DTE’s power increase can raise power up to 25 percent. This means that your Claas Arion 420 works at peak performance even under extreme load conditions.
For Tractors: PowerControl PDI
With a DTE power increase your tractor works even under extreme load with optimum performance. Depending on the tractor and engine, a DTE performance tuning can provide you with 25% more power output.
› Performance tuning for any job
› Significant consumption optimization per application
Do the DTE Performance Check!
Benefit fully from a DTE PowerControl tuning for your tractor. Gain an overview of other vehcile models and appropriate tuning options.