- Functionality and Description
Best performance values and results
To gain more power and torque, DTE uses the latest technology which is perfectly suited to your vehicle. The result is an impressive improvement in performance that will thrill you. more...
Best performance values and resultsWith DTE's latest tuning-technologiesOwn development and production
DTE does its own R&D as well as production work, due to this it remains the technology leader.Precision work
On the road performance perfection is the aim of our engineers, that’s why each vehicle gets a precise individual tune.Achieving optimum results
The end result, after all the development work is done, is a high quality product combined with DTE’s know-how and experience.Quality: Made in Germany
Quality: Made in GermanyFiberglass reinforced housingUltra-High-Speed-ProcessorOEM-QualitySimple installation, great result
All DTE's products come complete with easy to follow, step by step pictorial fitting instructions, which makes installation really quick and hassle free. more...
Simple installation, great resultsReady…set…go!Installed in a few easy steps!
The PowerControl comes with engine cabling and a step by step pictorial fitting guide.
With the vehicle specific wiring loom, the PowerControl is installed in a few easy steps. Getting the vehicle back to standard without leaving a trace is just as easy.Install, plug in and go!
Increases Dynamics, Profitability and Efficiency
- Simple installation and also removable without a trace!
- Plug&Play installation, no cutting of any wires etc
- The PowerControl is pre-configured and ready for use once installed
- Optimum results for your vehicle without complicated setup procedures
PowerControl achieves a reduction in fuel consumption of up to 12% depending on the vehicle, mileage and work effort. After a short payback period cost can be saved. more...
A calculatable advantage!With an effective and sustainable cost-benefit factoroptimum tuning for optimum labor input
PowerControl enables economically efficient driving in the lower speed range, thus ensuring an appreciable fuel savings. And to achieve this efficiency, the tuning system is matched to the vehicle's needs and the respective work assignment. This results in a high fuel economy because the engine always moves in the optimum speed range thanks to the precisely tuned additional control unit. Purposefully configured PowerControl reduces consumption to a minimum without sacrificing efficiency.And also in compliance with the strict Euro 6 emissions standard.
- Perfectly matched to the vehicle's needs and the respective work assignment
- The engine works in an optimized and efficient speed range
- Significant reduction in emissions
- Appreciable consumption optimization through low speeds
- Technical Details
Series Optimized by PowerControl Performance* 530 PS + 106 PS 390 kW + 78 kW Torque* 2400 NM + 480 NM tested and approved on gauged MAHA dyno, based on standardised and independent test proceduresTechnology System Auxiliary power control unit with with real-time injector tuning Channels 6-channel system for up to 6 injectors Features Multi-Map-Technology
Dynamic Parallel Injection Technology
Adaptive Sensor System
Individualisation of tuning possible on customer request
Upgrades possible, equipped for future applicationsHardware and Software
Hardware PowerControl PDI-System
Digital Signal Controller / MCU
High-precision microcontroller with 16 MIPS (million instructions per second)
Specially developed for automotive applications
-40°C up to +125°C/ -40°F up to 257°F
Integrated Active Power Management, optional power supply
Wiring loom Made by DTE with original safety plugs
Software Original DTE PowerControl software
Vehicle-specific tuning profile developed and fine-tuned by DTESafety and Certifications
Safety Features High-strength and heat-proof, fibre-glass reinforced housing with composite sealing against humidity and splash water according to IP67
Power & Current Limitation to protect connected engine components
Certifications Developed and manufactured according to management system for national and international road traffic laws, certified by TÜV Austria
Tuned based on standardised DTE test and measuring methods
Developed and manufactured by DTE in GermanyContents and Dimensions
Contents PowerControl PDI module
Engine-specific wiring loom
Installation manual with engine-specific photos
By-pass safety plug
Included Services Installation and Removal on-site at DTE by request
One-time re-programming for new vehicle
Optional Services Installation service at desired address
Dynometer performance measurement on MAHA MSR 500
Customized tuning profile
Dimensions and Weight 16 x 13 x 5 cm / 6 x 6 x 2 inch
1.3 kg / 2.9 lbs module weight
Item Number A028.869
* vehicle-specific deviations due to factory-provided tolerances and vehicle age upwards and downwards possible
How does the extra power come about?Why does the PowerControl have keypad program selection buttons?
1Deactivation required for TÜV approval.Is the tuning system detectable?Do I have to register my performance increase with the TÜV, the Dekra etc? (Europe only)Where is the performance system connected?Do the performance tuning box need a separate power supply?Is it possible to increase performance and also save on my fuel bill?How long does the installation of the PowerControl take?Does the PowerControl X app save my last settings?Can I transfer my PowerControl to my new vehicle?Do I need to report my insurance?
Yes, please inform your insurance company about the vehicle’s performance changes. (Only in Europe)What about my vehicle warranty?Can I still wash my engine?What is EngineProtect +?Do the engines emission values remain unaffected?Does the ECU’s protection functions remain intact?My vehicle already has high mileage. Will I still benefit from an increase in performance?Do you offer chip tuning for motorcycles?Does the increase in performance have an impact on the vehicle’s tax?My car has an automatic gearbox, will my vehicles performance still increase?Is it possible for my car to smoke excessively?Can DTE’s PowerControl be turned ON/OFF?
Yes, simply via the keypad, DTE’s PowerControl can be switched on & off as needed.
We appreciate your feedback!
Just send us an email to [email protected].
We say thank you!99%
our customers are
very pleased with us*91%
*Results from the actual customer survey
as of January 2016Did you know?
We are only satisfied when you are excited. And if something is not as you like, our Service team is happy to help.
What our customers say
We are constantly receiving feedback from the independent review portal eKomi, via email, social media and our customer surveys. Get an overview on our customers' opinions on this page.
Very good communication with the customer. All inquiries will be answered quickly with a solution. That's service!
Good support for self-installation, system functions, better performance with low fuel consumption.
This is already my second tuning chip. At the 1st driven over 150,000 km, all the best. Significantly more acceleration, consumption minimally reduced. Agreed installation date, staff very friendly, then test drive, all built great, paid and ready. Always again.
I was at the company and the installation was without problems. A test drive then showed the subjective performance boost. After a year with the box my fuel consumption has not increased (fuelbook logging). So all is well!
Product is top! It delivers what it promises!
Was very satisfied with the fast delivery, and I also was very well advised by a technician over the phone and could therefore install my components without problems in my vehicle.
My car is now great. I'm very satisfied with the tuning. The installation was easy. The delivery was the next day with me. I had a technical issue that could be resolved over the phone. I'm very satisfied with the product and the support
I now know my car barely. I never thought that it works so well. Will naturally recommend it.
I use DTE Systems products already over 7 years. Always have always received exhaustive information, regardless of which contact I have chosen, phone or mail. The products PedalBox and Chiptuning in my opinion are the best you can get on the market, the products have never let me down and do what they promise.
Expert advice, fast shipping and the quality of products (chip and pedalbox) I can judge well as a former car mechanic. I use both and the difference in acceleration dynamics and performance improvement is tremendous. The chiptuning and the pedal box harmonize together perfectly. I'll also need 1 - 1,5l less diesel. My vehicle has almost a motorsport feeling and I can not imagine driving without them. Great company!
I deliberately chose a tuning box of DTE Systems, because the increase in performance remains in a realistic magnitude and a certificate of conformity was included. The installation was relatively easy. Just as the acceptance by the TÜV. Was actually quite happy with my performance. However I lacked in some situations more pressure out from below. After installation of the box, the torque increase already in the lower speed range is appreciable. The fuel savings are in my case about 0.5l per 100km. The default setting of the box has not been altered by me. After 2000 km so far there were no problems. The shipment of DTE Systems is very fast. The service is very good, although I hardly had to use it.
All Features and Information
A real innovation is developed by DTE: the Multi-Map Technology. Here 4 up to 8 maps are stored in the chiptuning box, which are activated when needed. This means optimum power and torque, combined with a very low fuel consumption.
Through much finer atomization of the fuel injection, combustion is optimized and fuel much more efficiently utilized - without smoke or soot. Our additional control units are compatible with all diesel particulate filters and of course keep the Euro 6 standards strict one.
The Adaptive Sensor System scrutinizes all the relevant engine data and after detecting its respective load state, will provide more power when necessary. Should the driver demand more power, for example, when overtaking, the system will automatically switch on. If the additional power is not used, the system will gradually reduce the power, all power changes are seamless and dynamic.
Not only are the best performance yields based on engine load state but also on road speeds, that’s what DTE’s adaptive tuning technology offers, more power with less fuel usage.
This innovation allows DTE’s tuning products to learn the unique characteristics of your vehicle. During a short ‘learning’ phase, the chips memory function records the engines injection cycle data and optimises the reloaded maps accordingly. Standard vehicle tolerances are taken into account and an optimal tune is achieved – all without any complicated driver input.
A whole new range of new safety standards are introduced with DTE’s new Engine Protect+ feature. This function has the important task of continually monitoring the ECU’s signals to the engine and safeguarding them against any overloads. The protective functions of the ECU as well as air fuel ratios remain intact and within specification, ensuring complete peace of mind.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product has not yet been certified with a part approval. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.
and free return