- Functionality and Description
Best performance values and results
Perfectly matched to your vehicle DTE uses the latest technology for more power and torque. The result is an impressive improvement in performance that will excite you. more...
Best performance values and results with DTE's latest tuning-technologiesOwn development and production
DTE does its own R&D as well as production work, due to this it remains the technology leader.Precision work
On the road performance perfection is the aim of our engineers, that’s why each vehicle gets a precise individual tune.Achieving optimum results
The end result, after all the development work is done, is a high quality product combined with DTE’s know-how and experience.Quality: Made in Germany
All our products are manufactured in Germany, using the OEM quality materials, and according to the highest quality standards. This ensures excellent reliability and superior product longevity. more...
Best Quality and highest securityTogether combined in the new DTE Tuning ModuleFiberglass reinforced housing
Our newly developing housing is reinforced fiberglass which is perfectly suitable for high heat environments.Ultra-High-Speed-Processor
The integrated high-performance processor works with reference variable modifications and automatic signal speed adjustments.OEM-Quality
The rugged, 18-pin OEM quality connector plug is widely used in the automotive sector and is capable of handling very high loads.Simple installation, great result
All DTE's products come complete with easy to follow, step by step pictorial fitting guides, which makes fitting really quick and hassle free. more...
Simple installation, great results, ready…set…go!Installed in a few easy steps!
The PowerControl comes with engine cabling and a step by step pictorial fitting guide.
With the vehicle specific wiring loom, the PowerControl is installed in a few easy steps. Getting the vehicle back to standard without leaving a trace is just as easy.Install, plug in and go!
More power, less consumption
- Simple installation and also removable without a trace!
- Plug&Play installation, no cutting of any wires etc
- The PowerControl is pre-configured and ready for use once installed
- Optimum results for your vehicle without complicated setup procedures
With improved power and efficiency throughout the rev range, fuel consumption decreases by up to 15%. more...
More power, less consumptionSave fuel with DTE’s performance tuning modulesAccelerate, shift up a gear, lower your rpm
DTE’s PowerControl allows you to drive at much lower revs per minute, which significantly reduces fuel consumption. Gear changes can be made earlier and more fuel can be saved with each crankshaft revolution.
- Pull off and immediately change to 2nd gear
- Faster acceleration allows for earlier gear changes
- No constant down changing as the engine has more torque
Depending on your driving style, it’s possible to save up to 15% in fuel usage, quickly recouping your investment costs. The main savings are due to higher engine torque figures, with power available in the lower rpm range, your driving style soon adapts, and voilà, money in the bank!
- Technical Details
Series Optimised by PowerControl Performance* 122 PS 144 PS + 22 PS 90 kW 106 kW + 16 kW Torque* 200 NM 230 NM + 30 NM tested and approved on gauged MAHA dyno, Extra power and security certified in independent part approvalTechnology System Auxiliary power control unit with real-time sensor tuning Channels 3-channel system Features Multi-Map-Technology
Adaptive Sensor System
Individualisation of tuning possible on customer request
Upgrades possible, equipped for future applicationsHardware and Software
Hardware PowerControl CRD-System
Digital Signal Controller / MCU
High-precision microcontroller with 16 MIPS (million instructions per second)
Specially developed for automotive applications
-40°C up to +125°C/ -40°F up to 257°F
Integrated Active Power Management, optional power supply
Wiring loom Made by DTE with original safety plugs
Software Original DTE PowerControl software
Vehicle-specific tuning profile developed and fine-tuned by DTESafety and Certifications
Safety Features High-strength and heat-proof, fibre-glass reinforced housing with composite sealing against humidity and splash water according to IP67
Power & Current Limitation to protect connected engine components
Certifications Developed and manufactured according to management system for national and international road traffic laws, certified by TÜV Austria
Part approval for proven performance and safety
Developed and manufactured by DTE in GermanyContents and Dimensions
Contents PowerControl CRD module
Engine-specific wiring loom
Installation manual with engine-specific photos
By-pass safety plug
Included Services Installation and Removal on-site at DTE by request
One-time re-programming for new vehicle
Optional Services Installation service at desired address
TÜV registration at DTE on-site
Dynometer performance measurement on MAHA MSR 500
Customized tuning profile
Dimensions and Weight 13 x 13 x 4 cm / 5 x 5 x 1.6 inch
660 g / 1.5 lbs module weight
Item Number A012.652
* vehicle-specific deviations due to factory-provided tolerances and vehicle age upwards and downwards possible
We appreciate your feedback!
Just send us an email to firstname.lastname@example.org.
We say thank you!99%
our customers are
very pleased with us*91%
*Results from the actual customer survey
as of January 2016Did you know?
We are only satisfied when you are excited. And if something is not as you like, our Service team is happy to help.
What our customers say
We are constantly receiving feedback from the independent review portal eKomi, via email, social media and our customer surveys. Get an overview on our customers' opinions on this page.
Very good communication with the customer. All inquiries will be answered quickly with a solution. That's service!
Good support for self-installation, system functions, better performance with low fuel consumption.
This is already my second tuning chip. At the 1st driven over 150,000 km, all the best. Significantly more acceleration, consumption minimally reduced. Agreed installation date, staff very friendly, then test drive, all built great, paid and ready. Always again.
I was at the company and the installation was without problems. A test drive then showed the subjective performance boost. After a year with the box my fuel consumption has not increased (fuelbook logging). So all is well!
Product is top! It delivers what it promises!
Was very satisfied with the fast delivery, and I also was very well advised by a technician over the phone and could therefore install my components without problems in my vehicle.
My car is now great. I'm very satisfied with the tuning. The installation was easy. The delivery was the next day with me. I had a technical issue that could be resolved over the phone. I'm very satisfied with the product and the support
I now know my car barely. I never thought that it works so well. Will naturally recommend it.
I use DTE Systems products already over 7 years. Always have always received exhaustive information, regardless of which contact I have chosen, phone or mail. The products PedalBox and Chiptuning in my opinion are the best you can get on the market, the products have never let me down and do what they promise.
Expert advice, fast shipping and the quality of products (chip and pedalbox) I can judge well as a former car mechanic. I use both and the difference in acceleration dynamics and performance improvement is tremendous. The chiptuning and the pedal box harmonize together perfectly. I'll also need 1 - 1,5l less diesel. My vehicle has almost a motorsport feeling and I can not imagine driving without them. Great company!
I deliberately chose a tuning box of DTE Systems, because the increase in performance remains in a realistic magnitude and a certificate of conformity was included. The installation was relatively easy. Just as the acceptance by the TÜV. Was actually quite happy with my performance. However I lacked in some situations more pressure out from below. After installation of the box, the torque increase already in the lower speed range is appreciable. The fuel savings are in my case about 0.5l per 100km. The default setting of the box has not been altered by me. After 2000 km so far there were no problems. The shipment of DTE Systems is very fast. The service is very good, although I hardly had to use it.
All Features and Information for PowerControl in Detail
DTE Systems developed a Multi-Map-Technology to optimize up to five channels in real time - Common rail or boost pressure, turbo pressure, intake manifold pressure or air mass. PowerControl operates perfectly all relevant engine parameters of the latest and technologically demanding engines in a multi-dimensional map. And that in up to three by the driver selectable programs: Sport, Dynamic oder Efficiency.
The adaptive sensor system recognizes the respective load state of the engine on the basis of all relevant engine data and therefore prepares to release the extra power. If the driver asks for moreh power when overtaking, for example, the tuning automatically switches on. If additional power is not needed, the tuning reduces gradually. Any adaptation of the original engine control is in perfect sync and dynamic. And not just on the basis of the load state but also in dependance of speed for best performance yield. More power when needed and less fuel consumption, if possible - that is adaptive tuning with DTE technology.
With this innovation, the systems of DTE are able to learn the unique characteristics of your vehicle. The memory function records the individual data of the different injection cycles during a short break-in period. The information obtained form the basis for optimization. Manufacturer's tolerances are compensated and an optimum result for every vehicle achieved - manually without complex installations.
Under the name Engine Protect+ DTE introduces new security standards. This standard is responsible that the signals from the engine management are continuously monitored and that the connected sensors are protected to avoid an engine control overload. Air and fuel mixture remain in the physically efficient areas. The protective functions of the engine and the legally prescribed emission values stay unaffected.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance coverage without registration in the vehicle documents through a parts approval certificate. The shown product comes with a part approval which makes registry easy. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or additional control unit. We will be glad to provide you with detailed information.
and free return