- Functionality and Description
Best performance values and results
Best performance values and resultsWith DTE's latest tuning-technologiesOwn development and production
DTE does its own R&D as well as production work, due to this it remains the technology leader.Precision workAchieving optimum resultsQuality: Made in Germany
Quality: Made in GermanyFiberglass reinforced housingUltra-High-Speed-ProcessorOEM-QualitySimple installation, great result
Simple installation, great resultsReady…set…go!Installed in a few easy steps!
The PowerControl comes with engine cabling and a step by step pictorial fitting guide.Install, plug in and go!
More power, less consumption
- Simple installation and also removable without a trace!
- Plug&Play installation, no cutting of any wires etc
- The PowerControl is pre-configured and ready for use once installed
- Optimum results for your vehicle without complicated setup procedures
With improved power and efficiency throughout the rev range, fuel consumption decreases by up to 15%. more...
動力平順 經濟節油(只支持PowerControl X 系列产品)
- Technical Details
Series Optimized by PowerControl Performance* 181 PS + 26 PS 133 kW + 19 kW Torque* 295 FT-LBS + 60 FT-LBS Consumption up to -15% tested and approved on gauged MAHA dyno, based on standardised and independent test proceduresTechnology System Auxiliary power control unit with real-time sensor tuning newImproved technology of the latest chip generation with 5x more precise signal processing Channels new9-channel system Programs 3 programs
Sport Dynamic Efficiency
3 x 7 Performance levels Control Keypad control newApp controlFunctions and features Features newSports instrumentation panel newWarm-up-timer (configurable) newMemory function newMulti map technology 4.0 newMulti protocol technology Analogue/SENT Adaptive Sensor System Engine Protect+ Warranty 2 years product warranty Additional service Customization of tuning possible upon request newUpgradeable, ready for future use new2 x re-programming e.g. changing vehicles newInterchangeable between engine technologies gasoline / diesel / hybrid analogue and SENT possible Optional Services Installation and Removal on-site at DTE by request Installation service at desired address Dynometer performance measurement on MAHA MSR 500 Customized tuning profileHardware and Software Hardware PowerControl RX system Digital Signal Controller / MCU newHigh-precision microcontroller with 72 MIPS (million instructions per second) newSmartphone Connect Interface
compatible from Android 7.0 and from iOS 10
Specially developed for automotive applications
-40°C up to +125°C/ -40°F up to 257°F
Integrated Active Power Management Wiring loom Made by DTE with original safety plugs Software Original DTE PowerControl software Vehicle-specific tuning profile developed and fine-tuned by DTESafety and Certifications Safety Features High-strength and heat-proof, fibre-glass reinforced housing with composite sealing against humidity and splash water according to IP67 Power & Current Limitation to protect connected engine components Certifications Developed and manufactured according to management system for national and international road traffic laws, certified by TÜV Austria Tuned based on standardised DTE test and measuring methods Developed and manufactured by DTE in GermanyContents and Dimensions Contents PowerControl RX module Engine-specific wiring loom Installation manual with engine-specific photos By-pass safety plug Dimensions and Weight 13 x 13 x 4 cm / 5 x 5 x 1.6 inch 660 g / 1.5 lbs module weight Item Number A056.040
How does the extra power come about?Why does the PowerControl have keypad program selection buttons?
1Deactivation required for TÜV approval.Is the tuning system detectable?Do I have to register my performance increase with the TÜV, the Dekra etc? (Europe only)Where is the performance system connected?Do the performance tuning box need a separate power supply?Is it possible to increase performance and also save on my fuel bill?How long does the installation of the PowerControl take?Does the PowerControl X app save my last settings?Can I transfer my PowerControl to my new vehicle?Do I need to report my insurance?
Yes, please inform your insurance company about the vehicle’s performance changes. (Only in Europe)What about my vehicle warranty?Can I still wash my engine?What is EngineProtect +?Do the engines emission values remain unaffected?Does the ECU’s protection functions remain intact?My vehicle already has high mileage. Will I still benefit from an increase in performance?Do you offer chip tuning for motorcycles?Does the increase in performance have an impact on the vehicle’s tax?My car has an automatic gearbox, will my vehicles performance still increase?Is it possible for my car to smoke excessively?Can DTE’s PowerControl be turned ON/OFF?
Yes, simply via the keypad, DTE’s PowerControl can be switched on & off as needed.
We appreciate your feedback!
Just send us an email to [email protected].
We say thank you!99%
our customers are
very pleased with us*91%
*Results from the actual customer survey
as of January 2016Did you know?
What our customers say
Good support for self-installation, system functions, better performance with low fuel consumption.
Product is top! It delivers what it promises!
I now know my car barely. I never thought that it works so well. Will naturally recommend it.
All Features and Information
DTE have developed a multi-map tuning technology which can optimise up to five different channels, all in real time. Whether it be common rail pressure, boost pressure, turbo pressure, intake manifold pressure or air mass volume, DTE’s PowerControl is able to control them all. Even the latest generation and most technically demanding engines are effortlessly controlled, all within a multi-dimensional multi-map environment. The driver is able to select from 3 different programs: Sport, Dynamic and Efficiency.
Not only are the best performance yields based on engine load state but also on road speeds, that’s what DTE’s adaptive tuning technology offers, more power with less fuel usage.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product has not yet been certified with a part approval. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.