MERCEDES-BENZ E-KLASSE (W213) E 450 4-matic (213.068) 367 HP
DTE uses the latest software for extra power and torque, which is perfectly tuned for your specific vehicle. The result is an impressive boost in performance get your pulse racing. more...
All our products are manufactured in Germany, using the OEM quality materials, and according to the highest quality standards. This ensures excellent reliability and superior product longevity. more...
All DTE's products come complete with easy to follow, step by step pictorial fitting instructions, which makes installation really quick and hassle free. more...
With improved power and efficiency throughout the rev range, fuel consumption decreases by up to 15%. more...
|Series||Optimized by PowerControl|
|Performance*||367 PS||+ 40 PS|
|270 kW||+ 29 kW|
|Torque*||369 NM||+ 39 NM|
|tested and approved on gauged MAHA dyno, Extra power and security certified in independent part approval|
|System||Auxiliary power control unit with real-time sensor tuning|
|NewImproved technology of the latest chip generation with 5x more precise signal processing|
|Programs||3 programs Sport Dynamic Efficiency|
|3 x 7 Performance levels|
|Features||NewSports instrumentation panel|
|NewMulti map technology 4.0|
|NewMulti protocol technology Analogue/SENT|
|Adaptive Sensor System|
|Warranty||2 years product warranty|
|Additional service||Customization of tuning possible upon request|
|NewUpgradeable, ready for future use|
|New2 x re-programming e.g. changing vehicles|
|NewInterchangeable between engine technologies gasoline / diesel / hybrid analogue and SENT possible|
|Optional Services||Installation and Removal on-site at DTE by request|
|Installation service at desired address|
|Dynometer performance measurement on MAHA MSR 500|
|Customized tuning profile|
|Hardware||PowerControl RX system|
|Digital Signal Controller / MCU|
|NewHigh-precision microcontroller with 72 MIPS (million instructions per second)|
|NewSmartphone Connect Interface
compatible from Android 7.0 and from iOS 10
|Specially developed for automotive applications
40°C up to +125°C/ -40°F up to 257°F
|Integrated Active Power Management|
|Wiring loom Made by DTE with original safety plugs|
|Software||Original DTE PowerControl software|
|Vehicle-specific tuning profile developed and fine-tuned by DTE|
|Safety Features||High-strength and heat-proof, fibre-glass reinforced housing with composite sealing against humidity and splash water according to IP67|
|Power & Current Limitation to protect connected engine components|
|Certifications||Developed and manufactured according to management system for national and international road traffic laws, certified by TÜV Austria Part approval for proven performance and safety|
|Developed and manufactured by DTE in Germany|
|Contents||PowerControl RX+ module|
|Engine-specific wiring loom|
|Installation manual with engine-specific photos|
|By-pass safety plug|
|Dimensions and Weight||13 x 13 x 4 cm / 5 x 5 x 1.6 inch|
|660 g / 1.5 lbs module weight|
* vehicle-specific deviations due to factory-provided tolerances and vehicle age upwards and downwards possible
Just send us an email to [email protected]
We are also happy to get your opinion on eKomi.
We say thank you!
our customers are
very pleased with us*
*Results from the actual customer survey
as of January 2016
We are only satisfied when you are excited. And if something is not as you like, our Service team is happy to help.
What our customers say
We are constantly receiving feedback from the independent review portal eKomi, via email, social media and our customer surveys. Get an overview on our customers' opinions on this page.
“ Very good communication with the customer. All inquiries will be answered quickly with a solution. That's service! ”
“ Good support for self-installation, system functions, better performance with low fuel consumption. ”
“ I was at the company and the installation was without problems. A test drive then showed the subjective performance boost. After a year with the box my fuel consumption has not increased (fuelbook logging). So all is well! ”
“ Product is top! It delivers what it promises! ”
“ Was very satisfied with the fast delivery, and I also was very well advised by a technician over the phone and could therefore install my components without problems in my vehicle. ”
“ My car is now great. I'm very satisfied with the tuning. The installation was easy. The delivery was the next day with me. I had a technical issue that could be resolved over the phone. I'm very satisfied with the product and the support ”
“ I now know my car barely. I never thought that it works so well. Will naturally recommend it. ”
“ I use DTE Systems products already over 7 years. Always have always received exhaustive information, regardless of which contact I have chosen, phone or mail. The products PedalBox and Chiptuning in my opinion are the best you can get on the market, the products have never let me down and do what they promise. ”
“ Expert advice, fast shipping and the quality of products (chip and pedalbox) I can judge well as a former car mechanic. I use both and the difference in acceleration dynamics and performance improvement is tremendous. The chiptuning and the pedal box harmonize together perfectly. I'll also need 1 - 1,5l less diesel. My vehicle has almost a motorsport feeling and I can not imagine driving without them. Great company! ”
“ I deliberately chose a tuning box of DTE Systems, because the increase in performance remains in a realistic magnitude and a certificate of conformity was included. The installation was relatively easy. Just as the acceptance by the TÜV. Was actually quite happy with my performance. However I lacked in some situations more pressure out from below. After installation of the box, the torque increase already in the lower speed range is appreciable. The fuel savings are in my case about 0.5l per 100km. The default setting of the box has not been altered by me. After 2000 km so far there were no problems. The shipment of DTE Systems is very fast. The service is very good, although I hardly had to use it. ”
All Features and Information
DTE have developed a multi-map tuning technology which can optimise up to five different channels, all in real time. Whether it be common rail pressure, boost pressure, turbo pressure, intake manifold pressure or air mass volume, DTE’s PowerControl is able to control them all. Even the latest generation and most technically demanding engines are effortlessly controlled, all within a multi-dimensional multi-map environment. The driver is able to select from 3 different programs: Sport, Dynamic and Efficiency.
The Adaptive Sensor System scrutinizes all the relevant engine data and after detecting its respective load state, will provide more power when necessary. Should the driver demand more power, for example, when overtaking, the system will automatically switch on. If the additional power is not used, the system will gradually reduce the power, all power changes are seamless and dynamic.
Not only are the best performance yields based on engine load state but also on road speeds, that’s what DTE’s adaptive tuning technology offers, more power with less fuel usage.
This innovation allows DTE’s tuning products to learn the unique characteristics of your vehicle. During a short ‘learning’ phase, the chips memory function records the engines injection cycle data and optimises the reloaded maps accordingly. Standard vehicle tolerances are taken into account and an optimal tune is achieved – all without any complicated driver input.
A whole new range of new safety standards are introduced with DTE’s new Engine Protect+ feature. This function has the important task of continually monitoring the ECU’s signals to the engine and safeguarding them against any overloads. The protective functions of the ECU as well as air fuel ratios remain intact and within specification, ensuring complete peace of mind.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product has not yet been certified with a part approval. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product comes with a part approval which makes registration easy. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.